Unreinforced Fuel & Oil Hose NOW AVAILABLE - Shop Now

Buy Today, Delivery Tomorrow! - Next Day Shipping Available

£500 Minimum Order

NEW CUSTOMER DEAL

£25 Off Your First Order

25OFF

Agricultural Machinery Hose: Staying Running in Season

Agricultural Machinery Hose: Staying Running in Season

On a farm, a split hose in February is an inconvenience. The same split in the middle of drilling, silage or harvest is a lost weather window, a contractor stood idle and a customer on the phone asking why the part is not on the shelf. For agricultural engineers, machinery dealers and the merchants who supply them, the job is simple to describe and hard to do: have the right hose in stock before the season starts, not after the first breakdown.

The winter service window is when that gets decided. Tractors, loaders, pumps and handlers come into the workshop, worn hose gets found, and the parts order for spring gets written. This guide covers which machine circuits the agricultural hose range handles, what to hold on the shelf, and how to buy it so the stock is in before the first busy week. If you want the duty-by-duty overview of fuel, water and slurry first, see our guide to hose and ducting for agriculture.

Coolant & heaterLow-pressure fuel & oilAir linesPump & irrigation waterClips matched to bore£500 min order (ex VAT)

The Circuits We Cover — and the One We Don’t

Most hose failures on agricultural machinery fall into a handful of circuits. The stocked range covers the low-pressure ones that make up the bulk of service-bay replacements:

Engine coolant
EPDM rubber radiator hose for the main coolant runs on tractors, handlers and stationary engines. Heat and ozone resistant, which matters on machines that live outdoors.
Cab heater
EPDM rubber heater hose in the smaller bores used for cab heater feeds and returns — the hose that gets noticed the first cold morning it fails.
Fuel & oil, low pressure
Rubber multi purpose hose with an NBR/SBR tube for diesel feeds, leak-off and return lines, breathers and light oil transfer around the yard.
Air & water
Rubber air line hose for workshop compressors and tyre bays, plus PVC layflat for pump discharge and temporary irrigation runs.

The exception is high-pressure hydraulic hose. Crimped hydraulic assemblies for loaders, linkage and implement circuits are a specialist product, and Hoses UK does not stock them. If a customer’s failure is on the hydraulic side, it needs a hydraulic hose specialist; keep that clear at the counter and you avoid the most expensive mismatch in agricultural hose.

The Stocked Lines at a Glance

Figures below are taken from the current product pages; prices are ex VAT at the time of writing, so always check the product page for today’s rate and full size list.

Rubber Radiator Hose EPDM, textile reinforced. Bores from 28mm x 38mm, 20 m coils. −40°C to +120°C (intermittent +135°C), up to 10 bar depending on size. 32mm x 42mm / 20 m: £101.50.
Rubber Heater Hose EPDM, textile reinforced. 16mm x 25mm to 25mm x 36mm, 20 m coils. −40°C to +120°C, up to 10 bar. 16mm x 25mm / 20 m: £52.00.
Rubber Multi Purpose Hose NBR/SBR tube, textile braid. 5mm to 25mm bore, 100 m and 50 m coils. −20°C to +120°C, up to 20 bar depending on size. 6mm x 13mm / 100 m: £140.00.
Rubber Air Line Hose Textile reinforced. 6mm to 19mm bore, 60 m coils. Up to 20 bar depending on size, −20°C to +85°C. 10mm x 16mm / 60 m: £52.50.
PVC Layflat Hose Polyester-braid reinforced. 25mm to 103mm bore, 100 m coils, blue or yellow. Up to 4 bar depending on size, −10°C to +70°C. 25mm / 100 m: £54.50.
Clips Worm drive clips in packs of 10 from 9mm–12mm (£2.48) and T-bolt clamps in packs of 10 from 17mm–19mm (£3.97).
Match the hose to the fluid and the circuit first, then the bore. A coolant hose on a diesel line, or a low-pressure line on a hydraulic circuit, will fail however good the fit looks.

Using the Winter Window: A Pre-Season Stock Plan

1
List the fleet you service
Group your customers’ machines by make and era. Most of the coolant and heater bores repeat across a fleet, which keeps the coil count small.
2
Pull last season’s failures
Job cards and counter sales show which bores went first. Those are your core coils; everything else can be bought to demand.
3
Pair every coil with clips
Order clips in the matching ranges at the same time. A hose on the shelf with no clip to fit it is still a lost sale.
4
Consolidate into one order
Coolant, heater, fuel, air and layflat lines all count toward the same £500 minimum, so one basket clears free standard delivery.
5
Land it before the rush
Order once servicing has shown what is needed, so stock is on the shelf before the first busy week rather than chasing it during it.

For a wider view of timing your buying around the year, our posts on planning for seasonal peaks and replacement cycles for fleet and plant hose cover forecasting and reorder points in more depth.

In-Season: Keeping the Gaps Short

Hold a breakdown float
A modest stock of the bores that fail most — usually the coolant and heater sizes — turns a call-out into a same-day fix.
Cut to length on site
Coil hose means one stock line covers many machines. Pair it with a cutter and the right clips and the van becomes a mobile parts counter.
Water on the move
Layflat rolls flat for transport and stores compactly, which suits pump discharge, washdown and temporary irrigation runs between fields.

For washdown and general yard supply, our water hose range sits alongside the machinery lines, and the full clamps and clips range covers the clip sizes to suit.

Ordering for the Season

Stocked orders dispatch within 1–2 working days of cleared payment, with next-day delivery available and same-day collection from our Mirfield warehouse. Every order is on pro-forma and settled before dispatch — no credit checks and no application stage, which is part of how the wholesale pricing and stock depth are kept where they are. New trade customers take £25 off their first order.

Building your pre-season hose order? Browse the agricultural range, or ask the team to check bores and coil lengths against your customers’ machines.

Open a Trade AccountTalk to the TeamBrowse the range

Frequently Asked Questions

Do you supply hydraulic hose for tractors and loaders?
No. Hoses UK does not stock high-pressure hydraulic hose or crimped hydraulic assemblies. Our agricultural range covers coolant, heater, low-pressure fuel and oil, air line and water hose, plus clips and fittings.
Which hose suits tractor coolant and cab heater circuits?
EPDM rubber radiator hose for the main coolant runs and EPDM rubber heater hose for smaller heater feeds. Both are rated from −40°C to +120°C and supplied in 20 m coils.
When should agricultural dealers order hose for the season?
During the winter service window, once servicing has shown which bores are needed. Ordering then means stock is on the shelf before the busy period starts.
Can I mix hose types to reach the £500 minimum order?
Yes. The £500 minimum (ex VAT) applies to the whole order, so coolant, fuel, air and layflat hose and clips all count toward it. Free standard delivery applies to mainland UK orders over £500.